ZyXEL Communications ZYWALL 35 - V4.03 Información técnica descargar pdf (Pagina 11)

Condition:

(1) Enable Collect Statistics of ZyWALL5 under system reports.

(2) PC visits a web page on the internet.

(3) We can not see the statistics of host IP reports in ZyWALL5.

14. [BUG FIX] SPR ID: 070411473

Symptom: VPN traffic stops between two gateways.

Topology:

(192.168.100.0/24)

PC1--(LAN) ZyWALL 5-----+ +--- ZyWALL 70(LAN)----PC2

| |

----+--+--+----

ZyWALL 35

(DMZ)| |(LAN)

(Safenet) | |

PC3-------------+ +---------------PC4

(10.10.10.0/24) (192.168.10.0/24)

Condition:

(1) Reset ZyWALL5/35/70 ROM file.

(2) Configure the DMZ IP(10.10.10.1/24) and LAN(192.168.10.0/24) for ZyWALL35,

LAN IP 192.168.100.0/24 as ZyWALL70’s LAN.

(3) Build the Gateway to Gateway VPN between ZyWALL35 and ZyWALL70 with

the both LAN IP, then PC2 ping PC4, at this moment, it should be okay.

(4) Configure the Dynamic VPN rule in the ZyWALL5 with the Local IP as PC1.

(5) Build the VPN tunnel from PC3(Safenet) to the ZyWALL5,after the tunnel build

successfully, remove the PC1, then using the PC3 ping the PC1's IP.

(6) Then, you will find PC2 can’t ping PC4.

15. [BUG FIX] SPR ID: 070911460

Symptom: CI command "ip arp force on" does not take effect on WAN 2.

Condition:

(1) Let WAN 1/WAN 2 active and has traffic on them.

(2) CI command "ip arp status" to show that the timer of ARP entry would not

decrease due to the existence of the traffic.

(3) Use CI command "ip arp force on" to force the system to decrease timers of those

WAN ARP entries periodically.

(4) CI command "ip arp status" to show, timers of WAN 1 ARP entries would

decrease, but timers of WAN 2 would not.

16. [BUG FIX] SPR ID: 070717916

Symptom: ZyWALL can not connect to port 139 through the IPSec tunnel in PPTP

encapsulation mode when disable windows networking packet filter "Allow between

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 83 84

Sin comentarios

ZyXEL Communications ZYWALL 35 - V4.03 Información técnica Pagina 11