ZyXEL Communications ZYWALL 35 - V4.03 Información técnica descargar pdf (Pagina 28)

(2)omni.net connects with a ISDN simulator, and PPP server is P2002+.

(3)When WAN is down and the dialbackup is up, ZyWALL crash occurs.

40. [BUG FIX]

Symptom: Can't see the site on the public DMZ from Internet

Topology: PC1---(LAN)-+ +-(WAN1)---Internet-----PC3

| |

+-ZyWALL-+

| |

PC2---(DMZ)-+ +-(WAN2)---Internet

Condition:

The NAT setup of WAN 1 is full feature, and NAT setup of WAN 2 is SUA.

Can't see the site on the public DMZ from Internet

1. Set LAN to 192.168.1.1/24, DMZ to a public subnet.

2. Add a static route to let PC3 can routing to PC2 from WAN1.

3. WAN1 and WAN2 all active and have public IP addresses.

4. Set WAN1 NAT to Full Feature and modify the first defaul NAT rule to:

# Local Start IP Local End IP Global Start IP Global End IP Type

1 192.168.1.1 192.168.1.254 0.0.0.0 N/A M-1

5. Set WAN2 NAT to SUA.

6. PC3 Ping PC2 will failed.

41. [BUG FIX] SPR ID: 070228410

Symptom: ZyWALL BW MGMT class search order shows wrong when moving

classes.

Condition:

(1) Restore romfile(password:fenris120) from SPR, go to Class Setup under WAN1.

(2) Add sub-class FTP, bandwidth budget 180k, priority:5, service type:FTP.

(3) Add sub-class PC1, bandwidth budget 150k, priority:4, borrow,service

type:custom, Source IP:single 192.168.1.37.

(4) Can not move class 1 to 2.

42. [BUG FIX]

Symptom: Modem initilization process cannot finish, LG-340E CDMZ Wireless

phone.

Topology:PC-----(LAN)ZyWALL (AUX0)---- LG-340E CDMA Wireless phone

Condition:

(1) Connect this CDMA phone(LG-340E) to my PC directly (Baud rate

115200).

(2) Key in the AT commands "AT OK AT+CRM=1 OK AT$LGPKT=3 OK

ATDT#777 CONNECT".

(3) ZyWALL print message ※AUX Port init Done Modem Init Failed!!!§ in

console.

43. [BUG FIX]

Symptom: BM for SIP doesn't work on WAN interface.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 83 84

Sin comentarios

ZyXEL Communications ZYWALL 35 - V4.03 Información técnica Pagina 28