ZyXEL Communications ZYWALL 35 - V4.03 Información técnica Pagina 57

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 56
Enable Nail up
SA lifetime = 28800 seconds
Policy 2:
Local network: 192.168.1.33/24
Remote network: 192.168.2.33/24
SA lifetime = 180 seconds
(2) VPN configuration on ZW_B:
IKE 1:
Secure gateway: 192.168.70.100
Enable XAUTH server
SA lifetime = 180 seconds
Policy 1:
Local network: 2.2.2.2/24
Remote network: 1.1.1.1/24
SA lifetime = 28800 seconds
Policy 2:
Local network: 192.168.2.33/24
Remote network: 192.168.1.33/24
SA lifetime = 180 seconds
(3) PC1 ping PC2
(4) After a while the Policy 2 can’t be established anymore.
10. [BUG FIX][060517002]
Symptom: Some wordings in "eWC-ANTI-VURUS" are not correct.
Condition:
(1) Go to "eWC-ANTI-VIRUS-General".
(2) The wording "POP3 (TCP/UDP 110)” should be ”POP3 (TCP 110)"
(3) The wording "SMTP (TCP/UDP 25)” should be ”POP3 (TCP 25)"
11. [BUG FIX][060423782]
Symptom: The device can’t enable multiple proposal in IKE rule.
Condition:
(1) Add an IKE rule using "Preshare key" as authentication type.
(2) Add another IKE rule using "Certificate" as authentication type, different
preshare key and enable the multiple proposal.
(3) This IKE rule cannot save.
12. [BUG FIX][060515863]
Symptom: In eWC>HOME>Network Status>more page, wireless cannot get correct
port status.
Condition:
(1) Insert G-110 wireless card.
(2) Switch device to bridge mode.
(3) Go to eWC>HOME>Network Status>more page.
(4) The "Port Status" of Wireless Card is 100M/Full, but SMT is 54M.
(5) The "Port Status" of WLAN Interface has no any information.
Vista de pagina 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 83 84

Comentarios a estos manuales

Sin comentarios