ZyXEL Communications ZYWALL 35 - V4.03 Información técnica descargar pdf (Pagina 31)

Symptom: ZyWALL (bridge mode) cannot forward the broadcast fragmented

UDP packets.

Condition:

Topology:

Sender --- [WAN]DUT (Bridge Mode)[LAN] --- Receiver

(1) In bridge mode, set Firewall WAN->LAN permit, enable DoS attack protection

on WAN and LAN.

(2) Sender begins to send the broadcast fragmented UDP packets.

(3) Receiver cannot receive all the broadcast fragmented UDP packets.

4. [BUG FIX] ITS #13880

Symptom: Nokia E-series phones failed to retrieve e-mail from a server behind

5. [BUG FIX]

SPR ID: 070118862, 070118863, 070118864

Symptom: ZyWALL cannot reply packet on correct WAN interface if the packet

from some WAN subnet.

Condition:

Topology:

(192.168.2.1)

(192.168.1.1) wan2(192.168.1.3) wan1(192.168.2.2)

pc------------------------Router----------------------------------DUT--------------------------

(192.168.1.2) | |

---------------------------------------------------------------------

(1) Disable firewall on DUT

(2) Set DUT WAN on A/A mode.

(3) Put a PC on WAN2 subnet, and its IP is same subnet as WAN2 interface.

(4) PC ping 192.168.2.2 and it can not receive the reply packets.

6. [BUG FIX]

SPR ID: 070118895, 070118893, 070118894

provide a CI command to customize SMTP for sending log port

7. [BUG FIX]

SPR ID: 061221255

Symptom: Set VPN gateway with certificate but got error message on eWC.

Condition:

(1) Import the certificate "zyxel", password "test", which is provided by CSO.

(2) Configure a VPN-gateway (phase 1).

(3) Select just imported certificate as Authentication Key.

(4) "Apply" to save the setting.

(5) Try to change any configuration of phase1, the ZyWALL will generate an

warning error: "An error was detected on this page. Extra characters

were detected in the item HTML item value: MAILTO=support@esienet.de,

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 83 84

Sin comentarios

ZyXEL Communications ZYWALL 35 - V4.03 Información técnica Pagina 31