ZyXEL Communications ZYWALL 5 - V4.04 Manual de usuario descargar pdf (Pagina 20)

20/76

www.zyxel.com

Symptom: Service Object abnormal delete

Condition:

1.) Create 3 Services Like A_1, A_2, A_2 with Port 81/82/83

2.) Create a Group A_Test and include A_1, A_2, A_3

3.) Create a Group Frank_Test and include any Service Port like AIM and the A_Test Group

4.) Create a Firewall Rule LAN1 to WAN all any just Service Frank_Tes Group

5.) Remove A_2 and A_3 from A_Tes Group

6.) Try to Delete A_2, device will show you can't delete it. But afterreboot device, I can

delete A_2.

13. [BUG FIX] eITS# 120503134 , SPR: 120529109

Symptom: USG300 Bug2 l2TP using wrong Port for LDAP authentication

Condition:

Customer change LDAP port in server setting but they found device didn't work.

CSO operation.

They have let us check their verify steps and list for a SOP, we can see even customer

change the port to other one, device still send to default port 389.

14. [BUG FIX] eITS# 120600203/ 120600344 , SPR: 120301945

Symptom: BWM rule set the outgoing interface to IPSec Tunnel has error.

Condition:

Two issue

1st:

1. Set up a BWM rule with outgoing interface set to IPSec tunnel.

2. check running config, the bwm rule outgoing interface subcommand is set to "trunk"

not to "tunnel".

2nd:

1. Create a IPSec tunnel with IPSec policy name length over 16.

2. Set up a BWM rule with outgoing interface set to this IPSec tunnel. GUI shows error

message.

15. [BUG FIX] eITS# 120503357/120707647 , SPR: 120615980

Symptom: Firewall rule doesn't work normally with empty object

Condition:

1- Create a empty Address group and a Address object 192.168.1.29 for test later.

2- Create a Firewall rule, condition is from lan to wan and select empty address group for

source & action is deny.

3- Use a PC binding 192.168.1.29 ip address and ping 168.95.1.1 continually.

4- After add 192.168.1.29 object into empty address group, the PC's ping session doesn't

block and open a new web page successfully.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

Sin comentarios

ZyXEL Communications ZYWALL 5 - V4.04 Manual de usuario Pagina 20