
51/76
© Copyright 1995-2013, ZyXEL Communications Corp. All rights reserved.
107. [BUG FIX] ITS: 54390 SPR: 110119986
Symptom:
In Authentication configuration of VPN Gateway Pre-Shared key and Certificate can be
chosen simultaneously
Condition:
1. Apply the system-default.conf
2. Configuration > VPN >IPSec VPN> VPN Gateway, to add a only rule
3. In Authentication, choose Certificate and then choose Pre-Shared Key
4. The Certificate and Pre-Shared be chosen simultaneously as attached.
108. [BUG FIX] ITS: 42880 SPR:110119942
Symptom:
Can not build up a L2TP IPSec tunnel when the IPSec policy for L2TP is not in the first
place.
Condition:
1. Delete the default L2TP IPSec policy in VPN Gateway and VPN Connection.
2. Configure a normal IPSec tunnel for site to site static VPN and disable the policy
enforcement. The IPSec tunnel should be activated.
3. Configure an IPSec tunnel for L2TP. This policy will be in the second place.
4. Configure the L2TP VPN setting. Then build the L2TP VPN from PC to device, but fail
109. [BUG FIX] ITS: 56232 SPR:101105600
Symptom:
There is a typo error in IKE log.
Condition:
1. Create an IPsec VPN, and let the Pre-Shared Key of two sites different.
2. Connect the VPN tunnel, then enter into MONITOR/Log, there is typo errors exist in
the IKE log "INVALD_PALOAD_TYPE". It should
be ”INVALID_PAYLOAD_TYPE”
110. [BUG FIX] ITS: 54467 SPR:101026312
Symptom:
If the SSL VPN user index is not correct, the user login web page will redirect to access
page.
Condition:
1. Create two ext-group-user type users test-a and test-b, the index of test-a is smaller than
test-b, and they both contain a user ”justin”.
2. Configure a SSL VPN with test-b as the user.
3. Login the SSL VPN with user justin, but you will login the access page
111. [BUG FIX] ITS: 56220 SPR: 101126179
Symptom:
Comentarios a estos manuales