ZyXEL Communications ZYWALL 5 - V4.04 Manual de usuario descargar pdf (Pagina 54)

54/76

www.zyxel.com

2.2 IP Address Pool: DMZ1_SUBNET

c) GUI->Object->User/Group-> Add one user

3.1 User Name:test

3.2 User Type:user

3.3 Password:1234

d) LAN1 PC keyin wrong passwod and login failed 5 times, then you can’t login anymore

even you keyin right password.

e) Router(config)# show lockout-users

As following information, you can see test has been blocked.

No. Username Tried From Lockout Time Remaining

==================================================================

1 test console 00:29:55

119. [BUG FIX] ITS: 65663 SPR: 110721390

Symptom: Device will reboot when click GUI->MAINTAINANCE->Packet Flow Explore 3

times

Condition:

a) Reset device.

b) Create 200 IPsec VPN rules

c) Create 200 policy-route rules(for USG 1000)

d) Next Hop : IPsec VPN rules

e) Click GUI->MAINTAINANCE->Packet Flow Explore 3 times, device will hang then

reboot.

120. [BUG FIX] ITS: 63517 SPR: 110610961

Symptom: This issue is with disappearing VLAN settings after reboot or switch off/on zywall

USG 200

Condition:

a) Create a VLAN interface with 192.168.200.1. At this time the system will remind "This IP

is used by SSL VPN".

b) Change "Network Extension Local IP" of SSL VPN to another.

c) Configure VLAN to 192.168.200.1 again, reboot device, when device boots up it will be

0.0.0.0.

d) Configure VLAN to another IP, this problem doesn't exist.

121. [BUG FIX] ITS: 65468 SPR: 110712687

Symptom: DNAT is configured in a VPN connection rule. Everything works fine. If user

changes the VPN gateway connection?s name, the DNAT rule is disappear. DNAT does not

work anymore.

Condition:

a) Create a VPN gateway named "test".

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 75 76

Sin comentarios

ZyXEL Communications ZYWALL 5 - V4.04 Manual de usuario Pagina 54