ZyXEL Communications ZYWALL 5 - V4.04 Manual de usuario descargar pdf (Pagina 75)

75/76

www.zyxel.com

 Enter atkz –f –l 192.168.1.1 performing the “Restore Firmware” process.

 Enter atgo to bring up the FTP server on port 6

2. Restore Firmware

 If “Connect a computer to port 6 and FTP to 192.168.1.1 to upload the new file” displays

on the screen, you need to recover the firmware by the following procedure.

 You will use FTP to upload the firmware package. Keep the console session open in order

to see when the firmware recovery finishes.

 Set your computer to use a static IP address from 192.168.1.2 ~ 192.168.1.254. No matter

how you have configured the ZyWALL’s IP addresses, your computer must use a static IP

address in this range to recover the firmware.

 Connect your computer to the ZyWALL’s port 6 (the only port that you can use for

recovering the firmware).

 Use an FTP client on your computer to connect to the ZyWALL. This example uses the ftp

command in the Windows command prompt. The ZyWALL’s FTP server IP address for

firmware recovery is 192.168.1.1

 Log in without user name (just press enter).

 Set the transfer mode to binary. Use “bin” (or just “bi” in the Windows command prompt).

 Transfer the firmware file from your computer to the ZyWALL (the command is “put

1.01(XL.0)C0.bin” in the Windows command prompt).

 Wait for the file transfer to complete.

1 2 ... 70 71 72 73 74 75 76

Sin comentarios

ZyXEL Communications ZYWALL 5 - V4.04 Manual de usuario Pagina 75