ZyXEL Communications ZYWALL 5 - V4.04 Manual de usuario descargar pdf (Pagina 67)

67/76

www.zyxel.com

c) Set DUT LAN1 as a dhcp server, and first DNS server as wan1 1st DNS server, second

DNS server as wan1 2nd DNS server,third DNS server as wan1 3rd DNS server.

d) DUT will show cpu hing after a moment.

172. [BUG FIX] ITS: 66147 SPR: 110805779

Symptom: Ftp port number is incorrect when enter debug mode.

Condition:

a) Reboot DUT(for USG 20)

b) Press any key to enter debug mode

c) “atkz -f -l 192.168.1.1” “atgo”

d) Then you will see ”Connect a computer to port 4 and FTP to 192.168.1.1 to upload the new

file.” but only port 5 is active and can be upload file.

173. [BUG FIX] ITS: 64932 SPR: 110627184

Symptom: USG50 is not connected to pptp-server, but Win7 is OK.

Condition:

a) In ISP Account Rule

b) Set PPTP with Auth Type MS CHAP v2

c) Set Encryption Method MPPE 128 (encryption required)

d) Compression is ON

174. [BUG FIX] ITS: 64175 SPR: 110627227

Symptom: Login with ext-group-user account and DUT will hang over 5 mins

Condition:

a) Load the conf from customer.

b) Modify the config with test AD server and test account / group id.

c) Login with test account, the page will suspend with 5 mins because the weblogin.cgi cause

the memory overwrite.

175. [BUG FIX] ITS: 63200 SPR: 110526349

Symptom: In the 2.12 firmware, the USG does not allow virtual server rules to be created

when original IP is set to any and NAT loopback is enabled. When trying to create a similar

virtual server rule in a USG with 2.20 firmware, the USG will warn the user saying that

original IP is set to any while NAT loopback is enabled. However, the virtual server rule will

be created. The light bulb of this virtual server rule is also yellow. But the virtual server rule

will not work.

Condition:

a) In [Network -> NAT] add a rule.

b) Configure the following setting: Classification: virtual Server, Original IP: any, enable

NAT loopback.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 75 76

Sin comentarios

ZyXEL Communications ZYWALL 5 - V4.04 Manual de usuario Pagina 67