ZyXEL Communications GS3700 Series Guía de usuario Pagina 211

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 416
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 210
Chapter 23 AAA
GS3700/XGS3700 Series User’s Guide
211
authentication and accounting features on the Switch. Click on the RADIUS Server Setup link in
the AAA screen to view the screen as shown.
Figure 129 Advanced Application > AAA > RADIUS Server Setup
The following table describes the labels in this screen.
Table 96 Advanced Application > AAA > RADIUS Server Setup
LABEL DESCRIPTION
Authentication
Server
Use this section to configure your RADIUS authentication settings.
Mode This field only applies if you configure multiple RADIUS servers.
Select index-priority and the Switch tries to authenticate with the first configured
RADIUS server, if the RADIUS server does not respond then the Switch tries to
authenticate with the second RADIUS server.
Select round-robin to alternate between the RADIUS servers that it sends authentication
requests to.
Timeout Specify the amount of time in seconds that the Switch waits for an authentication request
response from the RADIUS server.
If you are using index-priority for your authentication and you are using two RADIUS
servers then the timeout value is divided between the two RADIUS servers. For example, if
you set the timeout value to 30 seconds, then the Switch waits for a response from the
first RADIUS server for 15 seconds and then tries the second RADIUS server.
Index This is a read-only number representing a RADIUS server entry.
IP Address Enter the IP address of an external RADIUS server in dotted decimal notation.
UDP Port The default port of a RADIUS server for authentication is 1812. You need not change this
value unless your network administrator instructs you to do so.
Shared Secret Specify a password (up to 32 alphanumeric characters) as the key to be shared between
the external RADIUS server and the Switch. This key is not sent over the network. This
key must be the same on the external RADIUS server and the Switch.
Vista de pagina 210
1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 415 416

Comentarios a estos manuales

Sin comentarios