ZyXEL Communications GS3700 Series Guía de usuario descargar pdf (Pagina 93)

Chapter 7 VLAN

GS3700/XGS3700 Series User’s Guide

The following table describes the related labels in this screen.

Table 31 Advanced Application > VLAN > Static VLAN

LABEL DESCRIPTION

ACTIVE Select this check box to activate the VLAN settings.

Name Enter a descriptive name for the VLAN group for identification purposes. This name

consists of up to 64 printable characters; spaces are allowed.

VLAN Group ID Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.

VLAN Type Select Normal (static) or Private. For Private VLANs, select Primary, Isolated or

Community.

Association VLAN

List

Primary private VLANs can associate with several (secondary) Community private VLANs

and up to one (secondary) Isolated private VLAN.

You only configure VLAN Association List for Primary private VLANs. Use a dash to

associate consecutive VLANs and a comma (no spaces) to associate non-consecutive

VLANs. For example, 51-53 includes 51, 52 and 53, but 51,53 does not include 52.

Secondary private VLANs can only be associated with one primary private VLAN.

Port The port number identifies the port you are configuring.

* Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this row

first to set the common settings and then make adjustments on a port-by-port basis.

Note: Changes in this row are copied to all the ports as soon as you make them.

Control Select Normal for the port to dynamically join this VLAN group using GVRP. This is the

default selection.

Select Fixed for the port to be a permanent member of this VLAN group.

Select Forbidden if you want to prohibit the port from joining this VLAN group.

Tagging Select TX Tagging if you want the port to tag all outgoing frames transmitted with this

VLAN Group ID.

Add Click this to create a new entry or to update an existing one.

This saves your changes to the Switch’s run-time memory. The Switch loses these changes

if it is turned off or loses power, so use the Save link on the top navigation panel to save

your changes to the non-volatile memory when you are done configuring.

Cancel Click Cancel to begin configuring this screen afresh.

Clear Click Clear to reset the fields to the factory defaults.

VID This field displays the ID number of the VLAN group. Click the number to edit the VLAN

settings.

Active This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).

Name This field displays the descriptive name for this VLAN group.

VLAN Type This field displays the Normal or Private (Primary, Isolated or Community) type VLAN

configured in the top part of this screen.

Association VLAN

List

This field displays which secondary private VLANs are associated with a primary private

VLAN configured in the top part of this screen.

Delete Click Delete to remove the selected entry from the summary table.

Cancel Click Cancel to clear the Delete check boxes.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 415 416

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications GS3700 Series Guía de usuario Pagina 93

Comentarios a estos manuales