ZyXEL Communications IES-708 Guía de usuario descargar pdf (Pagina 176)

100

101

Chapter 24 Port Authentication

IES-708-22A User’s Guide

176

24.2 RADIUS Screen

To open this screen, click Advanced Application > Port Authentication.

Figure 84 Advanced Application > Port Authentication

The following table describes the labels in this screen.

Table 53 Advanced Application > Port Authentication

LABEL DESCRIPTION

802.1x Click 802.1x to configure individual port authentication settings (see Section

24.3 on page 177).

Enable

Authentication

Server

Select this check box to have the IES-708-22A use an external RADIUS server

to authenticate users.

IP Address Enter the IP address of the external RADIUS server in dotted decimal notation.

UDP Port The default port of the RADIUS server for authentication is 1812. You need not

change this value unless your network administrator instructs you to do so.

Shared Secret Specify a password (up to 31 alphanumeric characters) as the key to be shared

between the external RADIUS server and the IES-708-22A. This key is not sent

over the network. This key must be the same on the external RADIUS server

and the IES-708-22A.

Apply Click Apply to save your changes to the IES-708-22A’s volatile memory. The

IES-708-22A loses these changes if it is turned off or loses power, so use the

Config Save link on the navigation panel to save your changes to the non-

volatile memory when you are done configuring.

Enable Local Profile

Setting

Select this check box to have the IES-708-22A use its internal database of user

names and passwords to authenticate users.

Name Type the user name of the user profile.

Password Type a password up to 31 characters long for this user profile.

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 447 448

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications IES-708 Guía de usuario Pagina 176

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications IES-708