ZyXEL Communications IES-708 Guía de usuario Pagina 240

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 448
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 239
Chapter 39 Diagnostic
IES-708-22A User’s Guide
240
The following table describes the labels in this screen.
Table 86 Management > Diagnostic
LABEL DESCRIPTION
Syslog/ Event Log Click Display to display a log of events in the multi-line text box.
Click Clear to empty the text box and reset the log.
IP Ping Type the IP address of a device that you want to ping in order to test a
connection.
In the field to the right specify the number of times that you want to ping the IP
address.
Click Ping to have the device ping the IP address (in the field to the left).
Loopback Test Select a port number from the Port drop-down list box and enter a VPI/VCI to
specify a PVC. Click OAM F5 Loopback to perform an OAMF5 loopback test
on the specified DSL port. An Operational, Administration and Maintenance
Function 5 test is used to test the connection between two DSL devices. First,
the DSL devices establish a virtual circuit. Then the local device sends an ATM
F5 cell to be returned by the remote DSL device (both DSL devices must
support ATM F5 in order to use this test). The results (“Passed” or “Failed”)
display in the multi-line text box.
Vista de pagina 239
1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 447 448

Comentarios a estos manuales

Sin comentarios