ZyXEL Communications IES-708 Guía de usuario descargar pdf (Pagina 357)

100

101

Chapter 54 Virtual Channel Management

IES-708-22A User’s Guide

357

This command adds a PVC to handle 2684 routed mode traffic.

" You must use the rpvc gateway set command to configure the gateway’s

settings before you use the rpvc set command.

The following example adds a PVC for 2684 routed mode traffic. It is for DSL port 1, VPI 8,

VCI 35. It sets the DEFVAL profile for downstream traffic shaping and for upstream traffic

policing. The CPE device’s WAN IP address is 192.168.10.200 with a netmask of 32 and the

gateway’s IP address is 192.168.10.102.

54.5.6 RPVC Show Command

Syntax:

ras> shdsl rpvc show <portlist>

where

This command lists the PVCs for handling 2684 routed mode traffic (RPVCs).

/<netmask> =

The bit number of the subnet mask of the subscriber’s IP

address. To find the bit number, convert the subnet mask to

binary and add all of the 1’s together. Take “255.255.255.0” for

example. 255 converts to eight 1’s in binary. There are three

255’s, so add three eights together and you get the bit number

(24).

Make sure that the routed PVC’s subnet does not include the

IES-708-22A’s IP address.

<gateway ip> =

The IP address of the gateway to which you want to send the

traffic that the system receives from this PVC. Enter the IP

address in dotted decimal notation.

ras> shdsl rpvc set 1 8 35 DEFVAL,DEFVAL 192.168.10.200/32 192.168.10.102

<portlist> =

The port(s) for which you want to display the RPVCs.

You can specify a single DSL port <1>, all DSL ports <*> or a

list of DSL ports <1,3,5>. You can also include a range of ports

<1,5,6~8>.

1 2 ... 352 353 354 355 356 357 358 359 360 361 362 ... 447 448

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications IES-708 Guía de usuario Pagina 357

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications IES-708