ZyXEL Communications IES-708 Guía de usuario Pagina 257

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 448
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 256
Chapter 42 Commands
IES-708-22A User’s Guide
257
rstp maxage <maxage sec> (STUC mode only) Set system
rstp’s max age.
H/H
rstp fwdelay <fwdelay sec> (STUC mode only) Set system
rstp’s forward delay time.
H/H
rstp port show (STUC mode only) Display enet
port rstp status.
M/L
rstp port enable <portlist> (STUC mode only) Set enet port
to enable rstp.
H/H
rstp port disable <portlist> (STUC mode only) Set enet port
to disable rstp.
H/H
rstp port priority <portlist> <priority> (STUC mode only) Set enet port’s
rstp priority.
H/H
rstp port pathcost <portlist> <pathcost> (STUC mode only) Set enet port’s
rstp pathcost.
H/H
dhcprelay show (STUC mode only) Displays
DHCP relay settings.
L/L
dhcprelay enable (STUC mode only) Turns on
DHCP relay.
M/H
dhcprelay disable (STUC mode only) Turns off
DHCP relay.
M/H
dhcprelay server set <vid> <primary-server>
[<secondary-server>]
(STUC mode only) Set DHCP
server IP address where the
DHCP request will forward to
<vid>: VLAN
< primary-server >: IP address for
primary server
< secondary-server >: IP address
for secondary server
Maximum 32 entries can be
configured.
Default: (empty list)
M/H
dhcprelay server delete <vid> [<primary-server>] (STUC mode only) Delete DHCP
server for 1 VLAN
M/H
dhcprelay server active <vid> <active-server> (STUC mode only) Activate
primary or secondary DHCP
server for 1 VLAN
M/H
dhcprelay relaymode <mode> (STUC mode only) <mode>: auto,
both
M/H
dhcprelay option82
enable
(STUC mode only) Turns on the
DHCP relay agent information
(Option 82) feature.
M/H
dhcprelay option82
disable
(STUC mode only) Turns off the
DHCP relay agent information
(Option 82) feature.
M/H
dhcprelay option82 set <relay info> (STUC mode only) Adds the
specified information for the relay
agent.
M/H
dhcprelay opt82sub2
enable
(STUC mode only) Turns on
option 82 sub-option 2
M/H
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P
Vista de pagina 256
1 2 ... 252 253 254 255 256 257 258 259 260 261 262 ... 447 448

Comentarios a estos manuales

Sin comentarios