ZyXEL Communications ZYWALL 5 - V4.04 Guía de usuario Pagina 130

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 181
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 129
ZyXEL Confidential
404XD3C0.docx
130/181
(3) In ZWB, SMT 24.8, type "ipsec sho sa", the "input idle count" in "INBOUND"
will be decreasing, it works correctly.
(4) Now, In PC1, ping PC2 from PC1 with one packet then stop the traffic in the
tunnel.
(5) In ZWB, SMT 24.8, type "ipsec sho sa", the "input idle count" in "INBOUND"
stay unchanged.
(6) The input idle timeout mechanism will not work anymore.
5. [BUG FIX]
Symptom: Output idle timer doesn’t work correctly.
Condition:
PC1--(L)ZW5(W)--Intranet--(W)Router(L)--PC2
(1) ZW5 and Router had established VPN tunnel.
(2) Output idle timer=120 secs, input idle timer=30 secs.
(3) Unplug the WAN link of Router, make a ICMP echo request to PC2 from PC1.
(4) ZW5 doesn’t send out "are u there" packets to peer gateway after 120 seconds.
6. [BUG FIX] 050613568
Symptom: There is no conflict check between VPN dynamic rule and static rule on local
ip address.
Condition:
1. Goto CUI VPN page, add one dynmaic IKE rule and static IKE rule.
2. Add one policy with local ip set as 192.168.1.0/24 into dynamic rule.
3. Add one policy with local ip set as 192.168.1.1/32 into static rule.
4. The static rule’s policy can be saved without conflict error.
7. [BUG FIX] 050615688
Symptom: The Log Consolidation Period can not configure properly.
Condition:
1. Goto eWC->LOGS->Log Settings page, input the vaule, 300, into
”Log Consolidation Period” field, then apply the setting.
2. Refresh the Log Settings page, the value in ”Log Consolidation Period” field show
as 44.
Modifications in V3.64(XD.2) | 06/10/2005
Modify for formal release.
Modifications in V 3.64(XD.2)b3 | 05/31/2005
1. [BUG FIX] 050527748
Symptom: DNS of Dail backup had some problem if WAN's Encapsulation
= PPTP mode.
Condition:
1. Restore default Rom.
2. WAN is configured as PPTP, and WAN is connected.
3. Configure Dial backup.
4. Unplug the WAN, and WAN is disconnected, and Dial backup is
connected.
5. eWC/DNS/System, DNS server keep old DNS IP ( Assigned from
PPTP server) .
Vista de pagina 129
1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 180 181

Comentarios a estos manuales

Sin comentarios