ZyXEL Communications ZYWALL 5 - V4.04 Guía de usuario Pagina 138

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 181
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 137
ZyXEL Confidential
404XD3C0.docx
138/181
(1) Dos command ”ping 192.168.1.1 -l 2000”
(2) User can not see ”ping of death” consolidation log on eWC/LOGS page
(3) Bridge mode only.
19. [BUG FIX] 050303203
Symptom: DNS inverse query causes memory leak.
Condition:
(1) Set A PC on the ZyWALL LAN site.
(2) The DNS server of the PC sets to the ZyWALL.
(3) The PC sends DNS inverse query continually (ex: 140.113.23.1), the system will
generate memory leak.
20. [BUG FIX] 050201041
Symptom: "Gateway Domain Name Update Timer" in eWC --> VPN --> Global
Setting didn't work.
Condition:
(1) Set one IKE rule which secured gateway address is domain name.
(2) Set "Gateway Domain Name Update Timer" to 15 minutes and apply.
(3) System will not update secured gateway domain name according to the setting
unless system reboot.
21. [BUG FIX] 050415693
Symptom: Resolving a domain name which start with number (for example
4youcard.com) will fail.
Condition: CI command "ip ping 4youcard.com" and it will fail.
22. [BUG FIX] 050406055
Symptom: ZyWALL VPN traffic will lose from time to time
Condition:
(1) To create tunnel from zw5 to peer.
(2) To ping the LAN PC of peer VPN gateway fom the LAN PC of zw5 via the tunnel.
(3) About 1 min, it will re-key again.
(4) The tunnel loses packet.
23. [BUG FIX] 041201001
Symptom: Router will crash when receive an unrecognizable DNS response
Condition:
Environment:
PC(192.168.1.33)-----(192.168.1.1)ZW5---Internet
(1) Set ZW5's system DNS server as "164.67.128.1"
(2) From PC, send a DNS query to ZW5. The DNS format is as following:
cf 07 01 00 00 01 00 00 00 00 00 00 04 75 63 6c
61 03 65 64 75 00 00 ff 00 01
(3) ZW5 will relay the DNS query to "164.67.128.1".
(4) ZW5 will crash after receive DNS response from "164.67.128.1"
24. [BUG FIX] 050311685
Symptom: Firewall WAN to DMZ Reject can’t work.
Condition: PC A ---- (W)ZW5 (DMZ) 10.1.1.1 --- 10.1.1.100 ZW10W
(1) In eWC Firewall Default Action WAN to DMZ select Reject. And enable Log
(2) One ZW10W connect to ZW5 DMZ port and IP is 10.1.1.100
(3) Add default server 10.1.1.100.
Vista de pagina 137
1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 180 181

Comentarios a estos manuales

Sin comentarios