ZyXEL Communications ZYWALL 5 - V4.04 Guía de usuario descargar pdf (Pagina 166)

ZyXEL Confidential

404XD3C0.docx

166/181

Appendix 1 Remote Management Enhancement (Add SNMP & DNS Control)

New function

(1) You can change the server port.

(2) You can set the security IP address for each type of server.

(3) You can define the rule for server access. (WAN only/LAN only, None, ALL).

(4) The secure IP and port of the SNMP server is read only

(5) The port of the SNMP and DNS server is read only.

(6) The default server access of the SNMP and DNS is ALL.

Modification

(1) The default value for Server access rule is ALL.

(2) Under the default setting: You can setup the Menu 15 to forwarding the server to LAN

IP address. Thus you can configure the router through the WAN and you don’t need to

modify the server management or filter.

Note

(1) DNS Service is not available in Bridge Mode.

Menu 24.11 - Remote Management Control

TELNET Server: Port = 23 Access = ALL

Secure Client IP = 0.0.0.0

FTP Server: Port = 21 Access = ALL

Secure Client IP = 0.0.0.0

SSH Server: Certificate = auto_generated_self_signed_cert

Port = 22 Access = ALL

Secure Client IP = 0.0.0.0

HTTPS Server: Certificate = auto_generated_self_signed_cert

Authenticate Client Certificates = No

Port = 443 Access = ALL

Secure Client IP = 0.0.0.0

HTTP Server: Port = 80 Access = ALL

Secure Client IP = 0.0.0.0

SNMP Service: Port = 161 Access = ALL

Secure Client IP = 0.0.0.0

DNS Service: Port = 53 Access = ALL

Secure Client IP = 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 180 181

Sin comentarios

ZyXEL Communications ZYWALL 5 - V4.04 Guía de usuario Pagina 166