ZyXEL Communications ZYWALL 5 - V4.04 Guía de usuario Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 181
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
ZyXEL Confidential
404XD3C0.docx
8/181
9. [BUG FIX] SPR ID: 080905611
Symptom:
After synchronization with same NTP server on PC and ZyWALL,
the time on ZyWALL is always 5 seconds later than PC time.
Topology:
PC------------- (L) ZyWALL (W) ---Internet
Condition:
(1) Restore to default romfile, login Web page.
(2) Edit eWC/MAINTENCE/Time and Date, Time Protocol=NTP(RFC-1305), Time
Server Address=”time.stdtime.gov.cn”, then click “Synchronize Now”.
(3) PC also synchronizes with the Time Server (“time.stdtime.gov.cn”).
(4) Compare the PC with ZyWALL, the time on ZyWALL is always 5 seconds later
than PC time.
10. [BUG FIX] SPR ID: 080813923
Symptom:
After setting static wan IP address, release/renew device’s IP address, the route table is
not correct.
Condition:
(1) In eWC>WAN page, set static IP address “172.25.22.220”, its gateway is
“172.25.22.254”.
(2)In SMT, input CI “ip dhcp enif1 client release” and “ip dhcp enif1 client renew”.
(3)In SMT, input CI “ip r s”. There is no default route, so the route table is wrong.
11. [BUG FIX] SPR ID: 071121416
Symptom:
When 3CX phone A calls another 3CX phone B(enable sip ALG), the console will
display some information.
Topology:
3CX Phone A------------- (L)ZyWALL (W)------------- 3CX Phone B----SIP Server
Condition:
ZyWALL:
(1) Set with CI command "sys romr|y"
(2) Set with CI command "ip alg enable SIP_ALG"
(3) Set firewall=disabled
3CX Phone A:
(1) 3CX Phone A registered to SIP server.
3CX Phone B:
(1) 3CX Phone B registered to SIP server
When 3CX phone A calls another 3CX phone B, the console display some
information:
memcpy size is different from malloc size !!!
tszie=00000323
mszie=00000324
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 180 181

Comentarios a estos manuales

Sin comentarios