
ZyXEL Confidential
404XD3C0.docx
81/181
(5) ZWP1 always reconnect tunnel between zw35 and zw70.
71. [BUG FIX] SPR ID: 060731994, 060731995
Symptom: Policy route is failed in a special topology.
Condition:
Topology:
ZyWALL 70
||
PC1(192.168.1.33)-----(SWITCH)-----(192.168.2.33)ZyWALL 35(192.168.10.1)-----PC2(192.168.10.33)
(1) The device under test is ZyWALL 70, the LAN subnet is 192.168.1.x with a LAN IP
alias 192.168.2.x.
(2) In ZyWALL 70, there is a policy route rule that will redirect the range
192.168.10.1-192.168.10.250 to 192.168.2.33.
(3) In ZyWALL 35, disable NAT and firewall feature.
(4) Ping PC1 from PC2, there is no response.
72. [BUG FIX] SPR ID: 060822312, 060822309, 060822310
Symptom: Trigger dial function is abnormal if we blocked all traffic from LAN to WAN.
Condition:
(1) Reset to default factory.
(2) Setting a correct PPPoE connection in WAN interface, disable "nailed-up", and idle
timer is 20 seconds.
(3) Enable firewall, and block all traffic from LAN to WAN.
(4) Ping "168.95.1.1" continuously in a LAN side PC, WAN interface still can get IP. (It
means WAN interface still can be triggered but the ping packet should be dropped by
firewall.)
73. [BUG FIX] SPR ID: 060918066
Symptom: Bridge mode VPN AV can not recognize ZIP file.
Condition:
[Topology]
FTP Server --- DUT1(Bridge) ----- PC
(1) DUT1 is in bridge mode, and then enables AV for FTP Server to PC and PC to FTP
Server.
(2) PC uploads a zip file to FTP Server. (The file is zipped with WinZIP )
(3) DUT logs AV can not recognize the zip type; and there are many logs for it.
74. [BUG FIX] SPR ID: 060914870
Symptom: There will be lots of "Common TOS double free" log by SYN flooding tool.
Condition:
(1) Reset to default factory.
(2) Change the device to bridge mode.
(3) Set a firewall rule for port 21 in WAN to LAN direction.
(4) The PC in WAN side uses SYN flooding tool (destination port is 21) to attack a PC in
LAN side.
Comentarios a estos manuales