
ZyXEL Confidential
404XD3C0.docx
43/181
(3) Then the WAN2 IP address will lose and need to renew to get the IP address.
34. [BUG FIX] SPR ID: 071017898
Symptom: Cannot find IM signatures through Attack type IM in
eWC>SECURITY>IDP>Signature.
Condition:
(1) Register UTM service from eWC>REGISTRATION>Registration.
(2) Update signatures from eWC>SECURITY>IDP>Update.
(3) Goto eWC>SECURITY>IDP>Signature, select attack type IM, but no IM
signatures found.
35. [BUG FIX] SPR ID: 071009492
Symptom: Device Crash when Vantage gets the VPN manual rule with the single local
address settings.
Condition:
(1) Use device's GUI to set a VPN manual rule with the single local address settings.
(2) Let device register to Vantage CNM.
(3) Select "Synchronization" >> "Device Overwrites Vantage CNM" >> "Customize"
>> "VPN", and then click apply.
(4) Vantage doesn’t receive the getting response message from device.
36. [BUG FIX] SPR ID: 071011647
Symptom: Bandwidth Management cannot control SIP P2P traffic.
Condition:
LAN: 192.168.1.1 WAN: 192.168.30.113
P2002A----------------------- ZyWALL -------------------P2002B
192.168.1.39 192.168.30.114
ZyWALL:
(1) Set with CI command "sys romr|y"
(2) Set with CI command "ip alg enable SIP_ALG"
(3) Firewall=disabled
(4) Edit web eWC/NAT/Port Forwarding, WAN Interface=WAN1,
index1/Active=enable, Aindex1/Name=sip, index1/Incoming Port(s) =5060-5060,
index1/Server IP Address= 192.168.1.39
(5) Edit web eWC/BW MGMT/Class Setup Interface=LAN, Add Sub-Class, Class
Name= SIP, Bandwidth Budget=200, Priority=7, Enable Bandwidth
Filter=enable, Service =SIP, Source & Destination IP Address = 0.0.0.0
P2002A
(1) P2002A unregistered to SIP server
(2) Configure SIP Server Address as 192.168.30.114
P2002B
(1) P2002B unregistered to SIP server
(2) Configure SIP Server Address as 192.168.30.113
Comentarios a estos manuales