ZyXEL Communications PLA-470 V2 - V3.0.5 Guía de instalación Pagina 206

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 349
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 205
networks. It is possible to have several PLC local area networks on the same electrical net-
work. These PLC local area networks just have to share the frequency band (from 1 to 30
MHz) and divide their transmission speed by the number of existing PLC local area net-
works.
Since the PLC network configuration is now completed, the IP network and the
suitable applications can be configured for the users of the Ethernet network con-
sisting of the PLC network. This IP network configuration is detailed in Chapter 10.
By clicking on the “Diagnostics” tab, system information can be displayed on
the PC and PLC device directly connected to the PC using Ethernet as well as histo-
ries on PLC products previously sensed by the configuration tool.
Figure 9.9 illustrates this tab for the bedroom device corresponding to the PLC
network (PLCNetworks) with the date and time of the last display of this device.
Just click on “Print” to save or send these histories to other PLC network installers.
Configuring a HomePlug AV Network
Concerning the HomePlug AV standard, there are several standard implementa-
tions based on specifications with two chips manufactured by Intellon with the inte-
grated 1.0 and 1.1 firmware versions.
Table 9.3 indicates the functionality differences between the versions based on
the INT6000 and INT6300 Intellon chips.
For easier configuration of a PLC network for end users able to broadcast PLC
technologies by ISP in order to broadcast HDTV flows from IPTV offers in a home
environment, there are two PLC network configuration modes:
Configuration using an embedded user interface on a PC or a gateway for
Internet access (in general, via the Web interface of this gateway).
Configuration using the EasyConnect mode used for easily implementing a
HomePlug AV PLC network. This mode consists of using the connection but-
tons installed on HomePlug AV PLC devices fitted with the INT6300 chip. To
configure a new network, the button of the first device must first be depressed
Configuring a HomePlug AV Network 187
Figure 9.9 PLC network status diagnostic function
Vista de pagina 205
1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 348 349

Comentarios a estos manuales

Sin comentarios