ZyXEL Communications PLA-470 V2 - V3.0.5 Guía de instalación Pagina 224

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 349
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 223
Powerline Bridge config version 0.2 by Manuel Kasper
Usage: plconfig [-pqrh] [-b device] [-s key] interface
-s key set network encryption key
(plaintext password or 8 hex bytes
preceded by 0x)
-b device use device (default is /dev/bpf0)
-p don’t switch interface to promiscuous
mode
-r request parameters and statistics
-q request Intellon-specific network
statistics
-h display this help
If -s is not specified, plconfig will listen for
management packets indefinitely (after requesting stats if -r is
specified)
As indicated in this help menu, the following PLC network functionalities are
proposed by the program:
s: used for configuring the NEK on devices locally connected to the configu-
ration PC using Ethernet.
r: used for interrogating the HomePlug chip of the locally connected PLC
device and retrieving a number of parameters and statistics. This option is also
used for displaying the electrical network PLC devices that are correctly con-
figured.
q: used for interrogating the PLC chip and retrieving values and statistics
specific to the manufacturer of Intellon chips.
As we can see, the program is not as complete as tools under Windows or Linux
but nonetheless offers the main functionalities required to configure a PLC network
(network key configuration and status of the PLC links at a physical level).
Configuring an HD-PLC Network
The HD-PLC standard was developed by Panasonic, which markets HD-PLC
devices mainly in Japan under the BL-PA300 (PL-HNC-006) P/N reference running
on 110V/50 to 60 Hz. The HD-PLC standard operates in network mode of the mas-
ter-slave type with a network device in master mode (configured using a button on
the device) and the other devices in slave mode (also configured using a button on
the devices). The embedded software on HD-PLC devices (based on an
ARM926-EJS hardware architecture and a μITRON OS, with a PX-PRP1A9-4 ref-
erence) has three main components:
The IP stack and HTTPD: The devices are configured using an embedded
WEB interface on HD-PLC devices.
The DataLink stack: Used for managing the PLC interface, the ETHERNET
interface, and the SERIAL interface.
Configuring an HD-PLC Network 205
Vista de pagina 223
1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 348 349

Comentarios a estos manuales

Sin comentarios