ZyXEL Communications PLA-470 V2 - V3.0.5 Guía de instalación Pagina 210

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 349
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 209
With all the functionalities of the Power Manager tool, it is then possible to
install, configure, and supervise a HomePlug AV network easily by following the
installation rules previously stated in Chapters 7 and 8.
Configuring a HomePlug 1.0 PLC Network Under Linux
In the same manner as under Windows, installing a PLC network under Linux con-
sists in connecting the network interface card of the PC to one of the PLC devices of
the electrical network and in using a PLC configuration tool for Linux.
In the case of a PLC device with a USB interface, the driver of the Ethernet USB
virtual interface must be installed. For this purpose, it is necessary to recover the
record containing this driver by downloading it at the following address (for a
Devolo device):
Configuring a HomePlug 1.0 PLC Network Under Linux 191
Figure 9.14 Renaming of local PLC device connected to the configuration PC
Figure 9.15 NEK configuration for PLC logical network
Vista de pagina 209
1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 348 349

Comentarios a estos manuales

Sin comentarios