ZyXEL Communications IES-612-51A Guía de usuario descargar pdf (Pagina 182)

100

101

Chapter 23 Port Authentication

IES-612-51 User’s Guide

182

23.2 RADIUS Screen

To open this screen, click Advanced Application, Port Authentication.

Figure 88 RADIUS

The following table describes the labels in this screen.

Table 52 RADIUS

LABEL DESCRIPTION

802.1x Click 802.1x to configure individual port authentication settings (see Section

23.3 on page 183).

Enable

Authentication

Server

Select this check box to have the IES-612-51 use an external RADIUS server to

authenticate users.

IP Address Enter the IP address of the external RADIUS server in dotted decimal notation.

UDP Port The default port of the RADIUS server for authentication is 1812. You need not

change this value unless your network administrator instructs you to do so.

Shared Secret Specify a password (up to 31 alphanumeric characters) as the key to be shared

between the external RADIUS server and the switch. This key is not sent over

the network. This key must be the same on the external RADIUS server and the

switch.

Apply Click Apply to save your changes to the IES-612-51’s volatile memory. The

IES-612-51 loses these changes if it is turned off or loses power, so use the

Config Save link on the navigation panel to save your changes to the non-

volatile memory when you are done configuring.

Enable Local Profile

Setting

Select this check box to have the IES-612-51 use its internal database of user

names and passwords to authenticate users.

Name Type the user name of the user profile.

Password Type a password up to 31 characters long for this user profile.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 413 414

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications IES-612-51A Guía de usuario Pagina 182

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications IES-612-51A