ZyXEL Communications IES-612-51A Guía de usuario Pagina 223

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 414
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 222
IES-612-51 User’s Guide
223
CHAPTER 33
Syslog
This chapter explains how to set the syslog parameters.
33.1 Syslog
The syslog feature sends logs to an external syslog server.
33.2 SysLog Screen
To open this screen, click Advanced Application, SysLog.
Figure 114 SysLog
The following table describes the labels in this screen.
Table 72 SysLog
LABEL DESCRIPTION
Enable Unix Syslog Select this check box to activate syslog (system logging) and then configure the
syslog parameters described in the following fields.
Syslog Server IP Enter the IP address of the syslog server. (The log facility is specified in Alarm
> Alarm Event Setup. See Section 40.4 on page 251.)
Apply Click Apply to save your changes to the IES-612-51’s volatile memory. The
IES-612-51 loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Vista de pagina 222
1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 413 414

Comentarios a estos manuales

Sin comentarios