ZyXEL Communications IES-612-51A Guía de usuario descargar pdf (Pagina 359)

Chapter 55 Virtual Channel Commands

IES-612-51 User’s Guide

359

3 Use the adsl rpvc route set command to configure domains for 2684 routed

mode traffic. The domain is the range of IP addresses behind the subscriber’s device (the

CPE or Customer Premises Equipment). This includes the CPE device’s LAN IP

addresses and the IP addresses of the LAN computers.

4 Use the adsl rpvc arp commands to view the Address Resolution Protocol table of

IP addresses of CPE devices using 2684 routed mode and configure how long the device

is to store them.

5 For upstream traffic: Since the subscriber's device will not send out a MAC address,

after the IES-612-51 reassembles the Ethernet packets from the AAL5 ATM cells, the

IES-612-51 will append the routed mode gateway's MAC address and the IES-612-51's

MAC address as the destination/source MAC address.

For downstream traffic: When the IES-612-51 sees the destination IP address is specified in

the RPVC (or RPVC domain), the IES-612-51 will strip out the MAC header and send them to

the corresponding RPVC.

Table 146 RPVC Commands

COMMAND DESCRIPTION P

adsl rpvc gateway set

<gateway-ip><vlan-

id>[<priority>]

Adds a gateway IP address to use for 2684 routed mode traffic. H/H

adsl rpvc gateway show Displays the gateway IP addresses that are configured for use with

2684 routed mode traffic.

M/L

adsl rpvc gateway delete

<gateway-ip>

Removes the gateway IP address that the device was set to use for

2684 routed mode traffic.

H/H

adsl rpvc set

<portlist><vpi> <vci><ds-

vcprofile[,us-vcprofile]>

This command adds a PVC to handle 2684 routed mode traffic.

Make sure that the routed PVC’s subnet does not include the IES-

612-51’s IP address.

Note: You must use the rpvc gateway set command

to configure the gateway’s settings before you

use the

rpvc set command.

H/H

adsl rpvc show <portlist> This command lists the PVCs for handling 2684 routed mode traffic

(RPVCs).

M/L

adsl rpvc delete

Removes the specified PVC for 2684 routed mode traffic. H/H

adsl rpvc route set

<port><vpi> <vci><ip>/

<mask>

Sets RPVC route on a port. H/H

adsl rpvc route show

This command lists the domains for 2684 routed mode traffic. M/L

adsl rpvc route delete

<port> <vpi><vci><ip>/

<mask>

Removes the specified domain for 2684 routed mode traffic. The

domain includes the subscriber’s LAN IP addresses.

H/H

adsl rpvc arp agingtime set

<sec>

Configures how long the device stores the IP addresses of CPE

devices using 2684 routed mode in the Address Resolution Protocol

table.

sec: The number of seconds (10~10000) the device is to keep the

Address Resolution Protocol table’s entries of IP addresses of 2684

routed mode gateways. Use 0 to disable the aging time.

H/H

1 2 ... 354 355 356 357 358 359 360 361 362 363 364 ... 413 414

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications IES-612-51A Guía de usuario Pagina 359

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications IES-612-51A