ZyXEL Communications IES-612-51A Guía de usuario descargar pdf (Pagina 338)

Chapter 54 ADSL Commands

IES-612-51 User’s Guide

338

54.4.1 ADSL Show Command Example

The following example displays connection statistics for ADSL port 1.

adsl linediag getld992-3 <port> Displays the line diagnostics results in the format defined in the

ITU-T G.992.3 standard after using the line diagnostics set

command on an ADSL port. Use the line diagnostics results to

analyze problems with the physical ADSL line.

Note: Wait at least one minute after using the line

diagnostic set command before using this

command.

L/L

adsl linediag setselt <port> Performs a single end line test on the specified port. This test

checks the distance to the subscriber’s location.

Note: The port must have an open loop. There

cannot be a DSL device, phone, fax machine

or other device connected to the subscriber’s

end of the telephone line.

H/H

adsl linediag getselt <port> Displays the status and the results of the SELT test on the

specified port. The report tells you what gauge of telephone

wire is connected to the port and the approximate length of the

line measured both in meters and thousands of feet.

L/L

adsl linediag toneDiag <port> Displays the tone diagnostics for a port in the format defined in

the ITU-T G.992.3 standard. You do not need to use the line

diagnostics set command first. Use the tone diagnostics to

analyze problems with the physical ADSL line.

L/L

Table 135 ADSL Statistics Commands (continued)

COMMAND DESCRIPTION P

Figure 157 ADSL Show Command Example

ras> statistics adsl show 1

port status mode up/downstream up time error second(15M/24H)

---- ------ -------- ------------- -------------- ---------------------

1 V adsl2 512/ 9089 00000:00:04:59 15/15

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 413 414

Sin comentarios

ZyXEL Communications IES-612-51A Guía de usuario Pagina 338