ZyXEL Communications IES-612-51A Guía de usuario descargar pdf (Pagina 268)

Chapter 43 System Commands

IES-612-51 User’s Guide

268

sys monitor vlimit <index>

Sets the maximum (<high>) or minimum (<low>)

voltage at the specified voltage sensor. You can

specify a voltage with up to three digits after a

decimal point (0.941 for example). Normal voltage at

each sensor:

index: 1=1.2v, 2=1.8v, 3=3.3v, 4=24v

H/H

sys reboot [show|sec|cancel] Sets the reboot timer or displays the timer and

remaining time for reboot. If a reboot has been

scheduled, use this command to prevent a reboot.

H/H

sys server disable

<telnet|ftp|web|icmp>

Turns a service off. H/H

sys server enable

<telnet|ftp|web|icmp>

Turns a service on. H/H

sys server port

<telnet|ftp|web> <port>

Sets a port for a service. H/H

sys server show Displays the device’s service status and port

numbers.

M/L

sys stdio set <minute> Sets the current stdio timeout. Enter 0 to have no

timeout.

H/H

sys stdio show Displays the current stdio timeout. L/L

sys syslog disable Turns off the syslog logging. H/H

sys syslog enable Turns on the syslog logging. H/H

sys syslog server <ip-address> Sets the IP address of the syslog server. H/H

sys syslog show Displays the syslog settings. M/L

sys time set <hh> [<mm> [ss]] Sets the system’s time. H/H

sys time show Displays the system’s current time. L/L

sys timeserver set <daytime>

<ip-address> [nosync]

Sets the time service protocol and the time server’s

IP address.

H/H

sys timeserver set <none> Sets the system to not use a time server. H/H

sys timeserver set <time|ntp>

[nosync]

Sets the time service protocol, time server’s IP

address and the device’s time zone.

H/H

sys timeserver show Displays the system’s time server. M/L

sys timeserver sync Retrieves the date and time from the time server. H/H

sys user auth

<local|radius|landr>

Sets the authentication method. H/H

sys user delete <name> Removes the specified user name of multi-login. H/H

sys user disable <name> Turns off the specified user name of multi-login. H/H

sys user enable <name> Turns on the specified user name of multi-login. H/H

sys user online Displays online user info. M/~

sys user server <ip-address>

[high|middle|low|deny]

Set remote authentication server’s IP address and

secret.

H/H

sys user set <username>

Creates or edits the password and privilege level of

the specified user name.

H/H

Table 94 System Commands (continued)

COMMAND DESCRIPTION P

1 2 ... 263 264 265 266 267 268 269 270 271 272 273 ... 413 414

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications IES-612-51A Guía de usuario Pagina 268

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications IES-612-51A