ZyXEL Communications IES-612-51A Guía de usuario Pagina 363

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 414
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 362
Chapter 55 Virtual Channel Commands
IES-612-51 User’s Guide
363
55.5.9 RPVC Route Show Command Example
The following example displays the domains for 2684 routed mode traffic for devices
connected to DSL ports 1 and 2.
55.5.10 RPVC Route Delete Command Example
The following example removes a domain for a CPE device is connected to DSL port 1 on the
IES-612-51 and the 2684 routed mode traffic is to use the PVC identified by VPI 8 and VCI
35. The CPE device’s LAN IP address is 10.10.10.10 and uses a subnet mask of
255.255.255.0. This includes the CPE device’s LAN IP addresses and the IP addresses of the
LAN computers.
55.5.11 RPVC ARP Agingtime Set Command Example
The following example sets the device to store the IP addresses 2684 routed mode gateways in
the Address Resolution Protocol table for 500 seconds.
55.5.12 RPVC ARP Agingtime Show Command Example
The following is an example.
Figure 194 RPVC Route Show Command Example
ras> adsl rpvc route show 1,2
port vpi vci ip/netmask
---- --- --- ------------------
1 8 35 10.10.10.0/24
2 8 35 10.10.11.0/24
Figure 195 RPVC Route Delete Command Example
ras> adsl rpvc route delete 1 8 35 10.10.10.1/24
Figure 196 RPVC ARP Agingtime Command Example
ras> adsl rpvc arp agingtime set 500
Figure 197 RPVC ARP Agingtime Show Command Example
ras> adsl rpvc arp agingtime show
rpvc aging time (sec): 500
Vista de pagina 362
1 2 ... 358 359 360 361 362 363 364 365 366 367 368 ... 413 414

Comentarios a estos manuales

Sin comentarios