ZyXEL Communications IES-612-51A Guía de usuario descargar pdf (Pagina 300)

Chapter 48 IGMP Commands

IES-612-51 User’s Guide

300

48.2 IGMP Filter Commands

Use the IGMP filter commands to define IGMP filter profiles and assign them to xDSL ports.

IGMP filter profiles allow you to control access to IGMP multicast groups. You can have a

service available to a specific IGMP multicast group. You can configure an IGMP filter profile

for an IGMP multicast group that has access to a service (like a SIP server for example). Then

you can assign the IGMP filter profile to xDSL ports that are allowed to use the service.

48.2.1 IGMP Filter Show Command Example

The following example displays which IGMP filter profile xDSL port 9 is using.

48.2.2 IGMP Filter Set Command Example

The following example sets xDSL port 9 to use the voice IGMP filter profile.

Table 113 igmpfilter Command Summary

COMMAND DESCRIPTION P

switch igmpfilter show

[portlist]

Displays which IGMP filter profile an xDSL port(s) is using.

portlist: You can specify a single xDSL port <1>, all xDSL

ports <*> or a list of xDSL ports <1,3,5>. You can also include

a range of ports <1,5,6~10>.

M/L

switch igmpfilter set [<port>|*]

<name>

Sets an xDSL port(s) to use an IGMP filter profile.

port|*: You can specify a single xDSL port, for example 1 or

all xDSL ports *.

name: The name of an IGMP filter profile.

H/H

switch igmpfilter profile set

Configures an IGMP filter profile.

name: Specify a name to identify the IGMP filter profile (you

cannot change the name of the DEFVAL profile). You can use

up to 31 ASCII characters; spaces are not allowed.

index: The number (1~16) to identify a multicast IP address

range.

startip: Type the starting multicast IP address for a range of

multicast IP addresses that you want to belong to the IGMP

filter profile.

endip: Type the ending multicast IP address for a range of IP

addresses that you want to belong to the IGMP filter profile.

If you want to add a single multicast IP address, enter it in both

the startip and endip fields.

H/H

switch igmpfilter profile delete

<name>

Removes the specified IGMP filter profile. H/H

switch igmpfilter profile show

[<name>|*]

Displays an IGMP filter profile’s settings. M/L

ras> switch igmpfilter show 9

port profile

--------------------------------------

9 DEFVAL

ras> switch igmpfilter set 9 voice

1 2 ... 295 296 297 298 299 300 301 302 303 304 305 ... 413 414

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications IES-612-51A Guía de usuario Pagina 300

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications IES-612-51A