ZyXEL Communications IES-612-51A Guía de usuario Pagina 50

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 414
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 49
Chapter 3 Front Panel
IES-612-51 User’s Guide
50
3.2 LEDs
The following table describes the LEDs on the front panel.
3.2.1 Console Port
For local management, you can use a computer with terminal emulation software configured
to the following parameters:
VT100 terminal emulation
9600 bps
No parity, 8 data bits, 1 stop bit
No flow control
Connect the male 9-pin end of the console cable to the console port of the IES-612-51.
Connect the female end to a serial port (COM1, COM2 or other COM port) of your computer.
3.2.1.1 Default Ethernet Settings
The factory default negotiation settings for the Ethernet ports on the IES-612-51 are:
Speed: Auto
Duplex: Auto
Table 2 LEDs
LED COLOR STATUS DESCRIPTION
ALM Red On The IES-612-51 is functioning abnormally.
Off The IES-612-51 is functioning normally.
SYS Green On The IES-612-51’s system is running.
Blinking The IES-612-51 is booting.
Off The IES-612-51’s stem is not running.
ETHERNET
(1~2)
Green On The IES-612-51 has a successful 10 Mbps connection
on this port.
Blinking The IES-612-51 is sending/receiving data on this port.
Orange On The IES-612-51 has a successful 100 Mbps connection
on this port.
Blinking The IES-612-51 is sending/receiving data on this port.
ADSL (1~12) Green On The IES-612-51 has a successful DSL connection.
Blinking The IES-612-51 is looking for a DSL connection.
Off The IES-612-51 does not have a DSL connection.
Vista de pagina 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 413 414

Comentarios a estos manuales

Sin comentarios