ZyXEL Communications IES-1248-51 Guía de usuario descargar pdf (Pagina 102)

100

101

Chapter 11 General Setup

IES-1248-51V User’s Guide

102

The following table describes the labels in this screen.

Table 13 General Setup

LABEL DESCRIPTION

Host Name Choose a descriptive name for identification purposes. This name

consists of up to 31 ASCII characters; spaces are not allowed.

Location Enter the geographic location of your device. You can use up to 31

ASCII characters; spaces are not allowed.

Contact Person's

Name

Enter the name of the person in charge of this device. You can use up

to 31 ASCII characters; spaces are not allowed.

Model This field displays your device type.

Stdio Timeout Set the inactivity timeout value (in seconds) for the HTTP (Web

Configurator), console, and telnet sessions to the IES-1248-51V. The

IES-1248-51V automatically disconnects a session if the management

session remains idle for more than the seconds you enter here.

Use Time Server

When Bootup

Select the time service protocol that the timeserver uses. Not all time

servers support all protocols, so you may have to use trial and error

to find a protocol that works. The main differences between them are

the time format.

When you select the Daytime (RFC 867) format, the switch displays

the day, month, year and time with no time zone adjustment. When

you use this format it is recommended that you use a Daytime

timeserver within your geographical time zone.

Time (RFC-868) format displays a 4-byte integer giving the total

number of seconds since 1970/1/1 at 0:0:0.

NTP (RFC-1305) is similar to Time (RFC-868).

None is the default value. Enter the time manually. Each time you

turn on the device, the time and date will be reset to 2000-1-1 0:0.

Time Server IP

Address

Enter the IP address of your timeserver. The device searches for the

timeserver for up to 60 seconds.

Current Time This field displays the time you open this menu (or refresh the menu).

New Time

(hh:min:ss)

Enter the new time in hour, minute and second format. The new time

then appears in the Current Time field after you click Apply.

Current Date This field displays the date you open this menu.

New Date (yyyy-

mm-dd)

Enter the new date in year, month and day format. The new date then

appears in the Current Date field after you click Apply.

Time Zone Select the time difference between UTC (Universal Time Coordinated,

formerly known as GMT, Greenwich Mean Time) and your time zone

from the drop-down list box.

Apply Click Apply to save your changes to the IES-1248-51V’s volatile

memory. The IES-1248-51V loses these changes if it is turned off or

loses power, so use the Config Save link on the navigation panel to

save your changes to the non-volatile memory when you are done

configuring.

Cancel Click Cancel to start configuring the screen again.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 653 654

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications IES-1248-51 Guía de usuario Pagina 102

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications IES-1248-51