ZyXEL Communications IES-1248-51 Guía de usuario Pagina 153

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 654
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 152
Chapter 18 xDSL Line Data
IES-1248-51V User’s Guide
153
18.2 xDSL Line Data Screen
This screen displays an ADSL port’s line bit allocation.
Discrete Multi-Tone (DMT) modulation divides up a line’s bandwidth into tones.
This screen displays the number of bits transmitted for each tone. This can be
used to determine the quality of the connection, whether a given sub-carrier loop
has sufficient margins to support ADSL transmission rates, and possibly to
determine whether certain specific types of interference or line attenuation exist.
See the ITU-T G.992.1 recommendation for more information on DMT.
The better (or shorter) the line, the higher the number of bits transmitted for a
DMT tone. The maximum number of bits that can be transmitted per DMT tone is
15.
The bit allocation contents are only valid when the link is up.
To open this screen, click Basic Setting > xDSL Line Data > Line Data.
Up Stream Output
Power
This field displays the amount of power that the subscriber’s ADSL
modem or router is using to transmit to this port. The total output
power of the transceiver varies with the length and line quality. The
farther away the subscriber’s ADSL modem or router is or the more
interference there is on the line, the more power is needed.
Info Atur
Info Atuc
The Info Atur fields show data acquired from the ATUR (ADSL
Termination Unit – Remote), in this case the subscriber’s ADSL
modem or router, during negotiation/provisioning message
interchanges. This information can help in identifying the subscribers
ADSL modem or router.
The Info Atuc fields show data acquired from the ATUC (ADSL
Termination Unit – Central), in this case IES-1248-51V, during
negotiation/provisioning message interchanges.
The vendor ID, vendor version number and product serial number are
obtained from vendor ID fields (see ITU-T G.994.1) or R-MSGS1 (see
T1.413).
A. At the time of writing, the IES-1248-51V always uses Trellis coding.
Table 29 xDSL Line Rate Info (continued)
LABEL DESCRIPTION
Vista de pagina 152
1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 653 654

Comentarios a estos manuales

Sin comentarios