ZyXEL Communications IES-1248-51 Guía de usuario Pagina 200

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 654
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 199
Chapter 24 MAC Filter
IES-1248-51V User’s Guide
200
The following table describes the labels in this screen.
Table 49 MAC Filter
LABEL DESCRIPTION
Port Use this drop-down list box to select an ADSL port for which you wish
to configure MAC filtering.
MAC Type a device’s MAC address in hexadecimal notation
(xx:xx:xx:xx:xx:xx, where x is a number from 0 to 9 or a letter from
a to f) in this field. The MAC address must be a valid MAC address.
Add Click Add to save your changes to the IES-1248-51V’s volatile
memory. The IES-1248-51V loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Port These are the numbers of the ADSL ports.
Mode Select Accept to only allow frames from MAC addresses that you
specify and block frames from other MAC addresses.
Select Deny to block frames from MAC addresses that you specify
and allow frames from other MAC addresses.
Active Select this check box to turn on MAC filtering for a port.
MAC This field lists the MAC addresses that are set for this port.
Delete Click Delete to remove a MAC address from the list.
Apply Click Apply to save your changes to the IES-1248-51V’s volatile
memory. The IES-1248-51V loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Vista de pagina 199
1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 653 654

Comentarios a estos manuales

Sin comentarios