ZyXEL Communications IES-1248-51 Guía de usuario descargar pdf (Pagina 182)

100

101

Chapter 20 IGMP

IES-1248-51V User’s Guide

182

The following table describes the labels in this screen.

20.8 IGMP Port Group Screen

Use this screen to display the current list of multicast groups each port joins. To

open this screen, click Advanced Application > IGMP > Port Group.

Figure 85 IGMP Port Group

Table 40 IGMP Filter Profile

LABEL DESCRIPTION

Index This is the number of the IGMP filter profile. Click a profile’s index

number to edit the profile. You cannot edit the DEFVAL profile.

Name This name identifies the IGMP filter profile.

Delete Select the Delete check box and click Delete to remove an IGMP

filter profile. You cannot delete the DEFVAL profile.

Name Type a name to identify the IGMP filter profile (you cannot change the

name of the DEFVAL profile). You can use up to 31 ASCII characters;

spaces are not allowed.

Start IP Enter the starting multicast IP address for a range of multicast IP

addresses to which you want this IGMP filter profile to allow access.

End IP Enter the ending multicast IP address for a range of IP addresses to

which you want this IGMP filter profile to allow access.

If you want to add a single multicast IP address, enter it in both the

Start IP and End IP fields.

Add Click Add to save your changes to the IES-1248-51V’s volatile

memory. The IES-1248-51V loses these changes if it is turned off or

loses power, so use the Config Save link on the navigation panel to

save your changes to the non-volatile memory when you are done

configuring.

Cancel Click Cancel to start configuring the screen again.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 653 654

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications IES-1248-51 Guía de usuario Pagina 182

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications IES-1248-51