
Chapter 2 Hardware Installation
IES-1248-51V User’s Guide
49
2.3 Installation Scenarios
The IES-1248-51V can be placed on a desktop or rack-mounted on a standard EIA
rack. Use the rubber feet in a desktop installation and the brackets in a rack-
mounted installation.
For proper ventilation, allow at least 4 inches (10 cm) of clearance at the left and
right of the IES-1248-51V. This is especially important for enclosed rack
installations.
2.3.1 Desktop Installation Procedure
1 Make sure the IES-1248-51V is clean and dry.
2 Set the IES-1248-51V on a smooth, level surface strong enough to support the
weight of the IES-1248-51V and the connected cables. Make sure there is a power
outlet nearby.
3 Make sure there is enough clearance around the IES-1248-51V to allow air
circulation and the attachment of cables and the power cord.
4 Remove the adhesive backing from the rubber feet.
5 Attach the rubber feet to each corner on the bottom of the IES-1248-51V. These
rubber feet help protect the IES-1248-51V from shock or vibration and ensure
space between IES-1248-51V when stacking.
Figure 6 Attaching Rubber Feet
Do not block the ventilation holes. Leave space between IES-1248-
51Vs when stacking.
Comentarios a estos manuales