
Chapter 10 System Information
IES-1248-51V User’s Guide
98
Figure 45 System Info
The following table describes the labels in these screens.
Table 11 System Info
LABEL DESCRIPTION
Hardware Monitor
Enable Select this check box to turn the hardware monitor on or clear it to
turn the hardware monitor off.
Temperature Unit Select C to display all temperature measurements in degrees Celsius.
Select F to display all temperature measurements in degrees
Fahrenheit.
Temperature Each temperature sensor can detect and report the temperature.
Temperature sensor 1 is near the ADSL chipset. Temperature sensor 2
is near the central processing unit. Temperature sensor 3 is at the
hardware monitor chip.
Current This shows the current temperature at this sensor.
MAX This field displays the maximum temperature measured at this
sensor.
MIN This field displays the minimum temperature measured at this sensor.
Average This field displays the average temperature measured at this sensor.
Threshold (Low) This field displays the lowest temperature limit at this sensor.
Threshold (Hi) This field displays the highest temperature limit at this sensor.
Status This field displays Normal for temperatures below the threshold and
Over for those above.
Voltage(V) The power supply for each voltage has a sensor that can detect and
report the voltage.
Current This is the current voltage reading.
MAX This field displays the maximum voltage measured at this point.
MIN This field displays the minimum voltage measured at this point.
Comentarios a estos manuales