
Chapter 67 ACL Commands
IES-1248-51V User’s Guide
538
67.1.1 ACL Profile Set Command Example
This example creates an ACL rule example named test for traffic from VLAN 10
with a priority level of 2. This rule limits the rate on the classified traffic to 1000
kbps and changes the priority level to 7.
67.1.2 ACL Profile Show Map Command Example
This example displays the port mapping table for the “test” ACL profile.
67.1.3 ACL Profile Show Command Example
This example displays the detailed settings of the “test” ACL profile.
switch acl profile delete
<name>
This command removes the specified ACL profile. You
cannot remove an ACL profile that is currently in use.
M/H
switch acl profile showmap
<name>
Displays the DSL port(s) to which the specified ACL profile
is applied.
L/L
switch acl profile show
[<name>]
Lists the names of every ACL profile or displays the
detailed settings of the specified ACL profile.
L/L
Table 203 ACL Commands
COMMAND DESCRIPTION P
ras> switch acl profile set test vlan 10 priority 2 rate 1000 rpri 7
ras> switch acl profile showmap test
profile: test
port type vpi vci
---- ------ --- -----
ras> switch acl profile show test
profile test:
rule:
vlan :10
priority:2
action:
rpri :7
rate :1000
Comentarios a estos manuales