
Chapter 34 ACL
IES-1248-51V User’s Guide
253
There is a normal PVC, and its PVID is 900. You create an ACL rule to replace the
VLAN ID with 901. Initially, the traffic for the PVC belongs to VLAN 900. Then, the
IES-1248-51V checks the ACL rule and changes the traffic to VLAN 901. When the
IES-1248-51V finally compares the VLAN ID of the traffic (901) to the VID of the
PVC (900), the IES-1248-51V drops the packets because they do not match.
34.2 ACL Setup Screen
Use this screen to assign ACL profiles to each PVC. To open this screen, click
Advanced Application > ACL.
Figure 118 ACL Setup
The following table describes the labels in this screen.
Table 74 ACL Setup
LABEL DESCRIPTION
ACL Profile Click ACL Profile to open the screen where you can set up ACL
profiles (see Section 34.3 on page 255).
ACL Profile Map Click ACL Profile Map to open the screen where you can look at
which ACL profiles are assigned to which PVCs (see Section 34.4 on
page 257).
Port Use this drop-down list box to select a port to which you wish to
assign an ACL profile. This field is read-only once you click on a port
number below.
VPI Type the Virtual Path Identifier for a channel on this port.
VCI Type the Virtual Circuit Identifier for a channel on this port.
ACL Profile Use the drop-down list box to select the ACL profile you want to assign
to this PVC.
Comentarios a estos manuales