ZyXEL Communications IES-1248-51 Guía de usuario descargar pdf (Pagina 348)

100

101

Chapter 47 Diagnostic

IES-1248-51V User’s Guide

348

The following table describes the labels in this screen.

Table 121 Diagnostic

LABEL DESCRIPTION

Syslog/ Event Log Click Display to display a log of events in the multi-line text box.

Click Clear to empty the text box and reset the log.

IP Ping Type the IP Address of a device that you want to ping in order to

test a connection.

In the Times field specify how often you want to ping the IP address.

Select the Interface from which you want to ping the IP address

(Ethernet or VoIP).

Click Ping to have the device ping the IP address (in the field to the

left).

Loopback Test Select a port number from the Port drop-down list box and enter a

VPI/VCI to specify a PVC. Click OAM F5 Loopback to perform an

OAMF5 loopback test on the specified DSL port. An Operational,

Administration and Maintenance Function 5 test is used to test the

connection between two DSL devices. First, the DSL devices establish

a virtual circuit. Then the local device sends an ATM F5 cell to be

returned by the remote DSL device (both DSL devices must support

ATM F5 in order to use this test). The results (“Passed” or “Failed”)

display in the multi-line text box.

LDM Test Select a port number from the Port drop-down list box and click Set

LDM Port to have the IES-1248-51V perform line diagnostics on the

specified port. The ADSL port must be set to ADSL2 or ADSL2+ ADSL

operational mode and have a connection. It takes about one minute

for the line diagnostics to finish. The screen displays a message

confirming upon which ADSL port line diagnostics will be performed.

Click Get LDM Data to display the line diagnostics results after using

the Set LDM Port button on an ADSL port. Use the line diagnostics

results to analyze problems with the physical ADSL line.

Click Get LDM Data(raw) to display the unformatted line diagnostics

results.

Click Get LDM Data(992.3) to display the line diagnostics results in

the format defined in the ITU-T G.992.3 standard.

Note: Wait at least one minute after using Set LDM Port before

using Get LDM Data.

1 2 ... 343 344 345 346 347 348 349 350 351 352 353 ... 653 654

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications IES-1248-51 Guía de usuario Pagina 348

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications IES-1248-51