
Chapter 2 Hardware Installation
IES-1248-51V User’s Guide
50
2.3.2 Rack-Mounted Installation
2.3.2.1 Rack-mounted Installation Requirements
The IES-1248-51V can be mounted on an EIA standard size, 21-inch rack or in a
wiring closet with other equipment. Follow the steps below to mount your IES-
1248-51V on a standard EIA rack using a rack-mounting kit.
Make sure the rack will safely support the combined weight of all
the equipment it contains.
Make sure the position of the IES-1248-51V does not make the rack
unstable or top-heavy. Take all necessary precautions to anchor
the rack securely before installing the unit.
• Use a #2 Phillips screwdriver to install the screws.
• See Chapter 71 on page 579 for the gauge of wire to use for the frame ground
connections.
• See Chapter 71 on page 579 for the hardware that is required to mount the IES-
1248-51V.
Failure to use the proper screws may damage the unit.
Do not block the ventilation holes. Leave space between IES-1248-
51V when stacking.
2.3.2.2 Rack-Mounted Installation Procedure
1 Align one bracket with the holes on one side of the IES-1248-51V and secure it
with the bracket screws smaller than the rack-mounting screws.
Comentarios a estos manuales