
Chapter 34 ACL
IES-1248-51V User’s Guide
256
The following table describes the labels in this screen.
Table 75 ACL Profile
LABEL DESCRIPTION
Profile Name Enter a descriptive name for the ACL profile. The name can be 1-31
printable ASCII characters long. Spaces are not allowed.
Rule Select which type of rule to use.
Note: The lower the number (1-14), the higher the priority the rule
has.
Provide additional information required for the selected rule.
Additional rules consist of one or more of the following criteria.
ethernet type Enter the 16-bit EtherType value between 0 and 65535.
vlan Enter a VLAN ID between 1 and 4094.
source mac Enter the source MAC address.
dest mac Enter the destination MAC address.
priority Select the IEEE 802.1p priority.
protocol Select the IP protocol used.
protocol type Enter the IP protocol number (between 0 and 255) used.
source ip Enter the source IP address and subnet mask in dotted decimal
notation.
dest ip Enter the source IP address and subnet mask in dotted decimal
notation.
tos Enter the start and end Type of Service between 0 and 255.
source port Enter the source port or range of source ports.
dest port Enter the destination port or range of destination ports.
Action Select which action(s) the IES-1248-51V should follow when the
criteria are satisfied.
rate Enter the maximum bandwidth this traffic is allowed to have.
replaced vlan Enter the VLAN ID that this traffic should use.
replaced
priority
Select the IEEE 802.1p priority that this traffic should have.
deny Select this if you want the IES-1248-51V to reject this kind of traffic.
ACL Profile List
Index This field displays a sequential value. The sequence in this table is not
important. Click this to edit the associated ACL profile in the section
above.
ACL Profile This field displays the name of this ACL profile.
Select
Delete
Select the check box in the Select column for an entry, and click
Delete to remove the entry.
Select All Click this to select all entries in the table.
Select None Click this to un-select all entries in the table.
Comentarios a estos manuales