ZyXEL Communications IES-1248-51 Guía de usuario Pagina 419

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 654
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 418
IES-1248-51V User’s Guide
419
CHAPTER 57
MAC Commands
This chapter describes how to configure the IES-1248-51V’s MAC commands.
57.1 MAC Filter Commands
Use the MAC filter to control from which MAC (Media Access Control) addresses
frames can (or cannot) come in through a port.
Table 152 MAC Filter Command Summary
COMMAND DESCRIPTION P
switch mac filter show [portlist] Displays the MAC filtering status (V
for enabled, - for disabled) and the
fixed source MAC addresses on the
specified xDSL port(s) or on all
xDSL ports if no port is specified.
M/L
switch mac filter enable [portlist] Turns on the MAC filtering feature
on the specified xDSL port(s) or on
all xDSL ports if no port is specified.
H/
H
switch mac filter disable [portlist] Turns off the MAC filtering feature
on the specified xDSL port(s) or on
all xDSL ports if no port is specified.
H/
H
switch mac filter mode <port>
<accept|deny>
Sets whether the IES-1248-51V
allows or blocks access for the MAC
addresses you specify.
H/
H
switch mac filter set <port> <mac>
[mac] [mac]...
Adds an allowed source MAC
address on the specified xDSL port.
mac: The source MAC address in
"00:a0:c5:12:34:56" format.
H/
H
switch mac filter delete <port> <mac>
[mac] [mac] ...
Removes a configured source MAC
address from the xDSL port that you
specify.
mac: The source MAC address in
"00:a0:c5:12:34:56" format.
H/
H
statistics mac Displays current MAC address
forwarding table.
M/L
Vista de pagina 418
1 2 ... 414 415 416 417 418 419 420 421 422 423 424 ... 653 654

Comentarios a estos manuales

Sin comentarios