ZyXEL Communications IES-1248-51 Guía de usuario Pagina 169

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 654
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 168
Chapter 19 VLAN
IES-1248-51V User’s Guide
169
19.5 VLAN Port Setting Screen
Use this screen to specify port VLAN IDs and to set whether or not Ethernet ports
propagate VLAN information to other devices.
To open this screen, click Advanced Application > VLAN > VLAN Port Setting.
Figure 76 VLAN Port Setting
The following table describes the labels in this screen.
Table 35 VLAN Port Setting
LABEL DESCRIPTION
Port The port numbers identify the IES-1248-51V’s ports.
PVID Type the Port VLAN ID (PVID) from 1 to 4094. The IES-1248-51V
assigns the PVID to untagged frames or priority frames (0 VID)
received on this port.
Priority Select an IEEE 802.1p priority to assign to untagged frames or
priority frames (0 VID) received on this port.
GVRP Select this check box if the IES-1248-51V should use GVRP to
automatically register and configure VLAN membership.
Acceptable Frame
Type
Select All to have the port accept both tagged and untagged
incoming frames.
A
Select Tag Only to have the port only accept incoming frames that
have a VLAN tag.
Apply Click Apply to save your changes to the IES-1248-51V’s volatile
memory. The IES-1248-51V loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Vista de pagina 168
1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 653 654

Comentarios a estos manuales

Sin comentarios