ZyXEL Communications IES-1248-51 Guía de usuario Pagina 425

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 654
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 424
IES-1248-51V User’s Guide
425
CHAPTER 58
IGMP Commands
This chapter describes the IGMP snooping and filtering commands.
58.1 IGMP Snooping Commands
Use the IGMP snoop commands to enable or disable IGMP proxy or IGMP
snooping.
58.1.1 IGMP Snoop Show Example
The following example displays the IGMP mode (proxy, snooping or disabled).
58.1.2 IGMP Snoop Enable Example
The following example sets the device to use IGMP proxy.
Table 155 igmpsnoop Command Summary
COMMAND DESCRIPTION P
switch igmpsnoop show Displays the IGMP mode (proxy, snooping or disabled). M/L
switch igmpsnoop enable
<proxy|snooping> [v2|v3]
Turns on IGMP proxy or snooping and, optionally,
specifies the IGMP version.
Use proxy to have the device use IGMP proxy. Use
snooping to have the device passively learn multicast
groups.
If you select IGMPv2 (v2), the device discards IGMPv3
packets. This provides better security if none of the
devices in the network use IGMPv3. If you select
IGMPv3 (v3), the device recognizes both IGMPv2 and
IGMPv3.
H/H
switch igmpsnoop disable Turns off IGMP proxy or snooping. H/H
ras> switch igmpsnoop show
IGMP Snooping/Proxy is Disable
ras> switch igmpsnoop enable proxy
Vista de pagina 424
1 2 ... 420 421 422 423 424 425 426 427 428 429 430 ... 653 654

Comentarios a estos manuales

Sin comentarios